AC 220V Digital Display Timer Delay Relay Board Module Timing Relay Switch 0-99 Seconds / Min
Description:
Voltage: 220V AC (160V-250V can work)
Power consumption: 1.0W
Time range: 1-99 seconds or 1-99 minutes
Display mode: 2-digit red digital tube (the remaining time is displayed during the countdown, otherwise the set time is displayed)
Time adjustment: Potentiometer (500K), dynamically displayed on the digital tube during adjustment
Accuracy: 1 (seconds or minutes, set according to jumpers)
Error: 2%
Trigger mode: Shorted for more than 0.02 seconds
Output contact: Normally open + normally closed
Output capacity: 10A (voltage range 0-250V AC, or 0-30V DC)
Output mode: Active output (control only fire line on and off), normally open + normally closed
Dimensions: 90mm * 40mm * 20mm (length * width * height), see picture.
Weight: 40g
Interface Description:
Input fire line
Input zero line
>N zero line output (actually connected directly to the output)
>LNO Firewire output (normally open, dynamic output)
>LNC FireWire output (normally closed, disconnected output, generally not connected)
Note: “ON” in the function description means that the relay is connected between “common” and “normally open”, that is, the output of the moving contact.
Package included:
1 X AC 220V Digital Display Timer Delay Relay Board Module
