Description:
5V:
Input voltage DC 2.6 ~ 5V,output DC 5V±3%
Maximum output : 5V/2.6A(See the table below for details)
6V:
Input voltage DC 2.6 ~ 6V,output DC 6V±3%
Maximum output : 6V/2.5A(See the table below for details)
9V:
Input voltage DC 2.6 ~ 6V,output DC 9V±3%
Maximum output : 9V/1.6A(See the table below for details)
12V:
Input voltage DC 2.6 ~ 6V,output DC 12V±3%
Maximum output : 12V/1.2A(See the table below for details)
DC DC Boost Converter Module working frequency 1MHZ.
Up to 96% Efficiency (usually is 74%-96%)
Quiescent current : 0.19mA
Operating temperature range : -40~+85 Degrees Celsiu
Storage temperature range : -65~+150 Degrees Celsius
2.54mm pin pitch,for MCU Development Board Breadboard friendly.
Size : 23.9 x 16 x 6.2mm
Weight : 2.5g
Protection:
Over current protection(OCP)
Over voltage protection(OVP)
Short circuit protection(SCP)
Over temperature protection(OTP)
Applications:
Battery powered equipment
MCU Breadboard Power Supply
Small power motors
Camera, Video camera
Toy car boat
Model aircraft
power bank
LED Lighting
Mobile phone charger
Attention:
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
Q & A:
Q : Why output voltage is less than the nominal voltage
A : Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
